AP Physics 2 · Lesson 14.11 · Unit 14 · CED topic 14.9
Read the opening paragraph and the "Learning objective · 14.9.A" box on the lesson page. In your own words, restate each idea below.
When light travels from one medium to another, some of the light is transmitted, some is reflected and some is absorbed.
The phase change of a reflected ray depends on the relative indices of refraction of the materials: a phase change of 180° occurs when a ray is reflected from a medium with a greater index of refraction than the medium through which the ray is traveling; no phase change occurs when it is reflected from a medium with a lower index. The phase of a wave does not change when it is refracted as it passes from one medium into another.
Thin-film interference occurs when light interacts with a medium whose thickness is comparable to the light's wavelength. The light reflected from the first interface and the light reflected from the second interface after passing through the film interfere, resulting in a single wave that is the sum of the two.
The amount of constructive or destructive interference depends on the film thickness, the wavelength, any phase shifts and the angle of incidence.
Examples include the colors of soap bubbles and oil films (from differences in film thickness) and anti-reflection coatings, which create destructive interference between light reflected from the two surfaces. The simplest coating has a thickness of one quarter of the wavelength of the light in the coating, and an index of refraction greater than that of air and less than that of the surface it covers (for light at normal incidence).
Boundary: quantitative analysis is limited to light incident normal to the surface.
Read this section. In your own words, summarize the main idea.
Read this section. In your own words, summarize the main idea.
Read this section. In your own words, summarize the main idea.
Read the "Worked example" box. Then, without looking back, try writing your own answer below.
A glass lens (\(n = 1.50\)) is coated with magnesium fluoride (\(n = 1.38\)) to reduce reflection of 550 nm light at normal incidence. Find the minimum coating thickness.
In two or three sentences, explain this lesson's main idea to someone who has not read it.