AP Physics 2 · Lesson 11.7 · Unit 11 · CED topic 11.6

Kirchhoff's loop rule

Name:   Date:  

1 Why this lesson matters

Read the opening paragraph and the "Learning objective · 11.6.A" box on the lesson page. In your own words, restate each idea below.

Energy changes in simple electrical circuits may be represented in terms of charges moving through electric potential differences within circuit elements: \(\Delta U_E = q\Delta V\).

Kirchhoff's loop rule is a consequence of the conservation of energy.

Kirchhoff's loop rule states that the sum of potential differences across all circuit elements in a single closed loop must equal zero: \(\sum \Delta V = 0\).

The values of electric potential at points in a circuit can be represented by a graph of electric potential as a function of position within a loop.

2 The rule

Read this section. In your own words, summarize the main idea.

Battery
Resistor

3 The potential-versus-position graph

Read this section. In your own words, summarize the main idea.

4 Loops with two sources

Read this section. In your own words, summarize the main idea.

5 Worked example

Read the "Worked example" box. Then, without looking back, try writing your own answer below.

A 9.0 V battery drives a current through 10 \(\Omega\) and 20 \(\Omega\) resistors in series. Use the loop rule to find the current and the potential difference across each resistor.

6 Sum it up

In two or three sentences, explain this lesson's main idea to someone who has not read it.