AP Physics 2 · Lesson 11.5 · Unit 11 · CED topic 11.5 (equivalent resistance)

Resistors in series and parallel

Name:   Date:  

1 Why this lesson matters

Read the opening paragraph and the "Learning objective · 11.5.A" box on the lesson page. In your own words, restate each idea below.

Circuit elements may be connected in series and/or in parallel. A series connection is one in which any charge passing through one element must proceed through all the elements in that connection and has no other path available; the current in each element in series must be the same.

A parallel connection is one in which charges may flow through one of two or more paths; across each path, the potential difference is the same.

A collection of resistors may be analyzed as though it were a single resistor with an equivalent resistance \(R_{eq}\). In series, the equivalent resistance is the sum of the individual resistances: \(R_{eq} = \sum R_i\).

In parallel, the inverse of the equivalent resistance is the sum of the inverses of the individual resistances: \(1/R_{eq} = \sum 1/R_i\). When resistors are connected in parallel, the number of paths available to charges increases, and the equivalent resistance of the group decreases.

2 Series connection

Read this section. In your own words, summarize the main idea.

3 Parallel connection

Read this section. In your own words, summarize the main idea.

4 Reducing a combination

Read this section. In your own words, summarize the main idea.

5 Worked example

Read the "Worked example" box. Then, without looking back, try writing your own answer below.

Resistors of 10 \(\Omega\), 20 \(\Omega\) and 30 \(\Omega\) are connected (a) in series and (b) in parallel. Find \(R_{eq}\) for each.

6 Sum it up

In two or three sentences, explain this lesson's main idea to someone who has not read it.