AP Physics 2 · Lesson 11.3 · Unit 11 · CED topic 11.3
Read the opening paragraph and the "Learning objectives · 11.3.A and 11.3.B" box on the lesson page. In your own words, restate each idea below.
Resistance is a measure of the degree to which an object opposes the movement of electric charge.
The resistance of a resistor with uniform geometry is proportional to its resistivity and length and inversely proportional to its cross-sectional area: \(R = \rho\ell/A\). Resistivity is a fundamental property of a material, depending on its atomic and molecular structure, that quantifies how strongly the material opposes the motion of charge. The resistivity of a conductor typically increases with temperature.
Ohm's law relates current, resistance and potential difference across a conductive element: \(I = \Delta V/R\). Materials that obey Ohm's law have constant resistance for all currents and are called ohmic. The resistivity of an ohmic material is constant regardless of temperature.
Resistors can convert electrical energy to thermal energy, which may change the temperature of the resistor and its environment.
The resistance of an ohmic element can be determined from the slope of a graph of the current in the element as a function of the potential difference across it.
Read this section. In your own words, summarize the main idea.
Read this section. In your own words, summarize the main idea.
Read the "Worked example" box. Then, without looking back, try writing your own answer below.
Find the resistance of a 10 m length of copper wire of diameter 1.0 mm (\(\rho = 1.7\times10^{-8}\ \Omega\cdot\)m).
In two or three sentences, explain this lesson's main idea to someone who has not read it.