AP Physics 1 · Lesson 5.4 · Unit 5 · CED topic 5.3
Read the opening paragraph and the "Learning objective · 5.3.A" box on the lesson page. In your own words, restate each idea below.
Torque results only from the force component perpendicular to the position vector from the axis of rotation to the point of application of the force.
The lever arm is the perpendicular distance from the axis of rotation to the line of action of the exerted force.
Torques can be described using force diagrams. Force diagrams are similar to free-body diagrams and are used to analyze the torques exerted on a rigid system. Similar to free-body diagrams, force diagrams represent the relative magnitude and direction of the forces exerted on a rigid system. Force diagrams also depict the location at which those forces are exerted relative to the axis of rotation.
The magnitude of the torque exerted on a rigid system by a force is described by the equation \(\tau = r_\perp F = rF\sin\theta\), where \(\theta\) is the angle between the force vector and the position vector from the axis of rotation to the point of application of the force.
Read this section. In your own words, summarize the main idea.
Read this section. In your own words, summarize the main idea.
Read this section. In your own words, summarize the main idea.
Read this section. In your own words, summarize the main idea.
Read the "Worked example" box. Then, without looking back, try writing your own answer below.
A 0.40 m wrench is used with a 60 N force that makes an angle of \(40^\circ\) with the wrench. Find the torque, and the force that would give the same torque if applied at \(90^\circ\).
In two or three sentences, explain this lesson's main idea to someone who has not read it.